• Home / Search
• Skirting Duct
  • CM 100/35
  • CM 125/35
  • CM 150/35
  • CM 150/40
  • CM 150/50
  • CM 200/50
  • CM 200/50/3
  • CML 125/35
  • CML 150/35
  • CML 150/40
  • CML 150/50
  • CML 200/50/3
• Floor and Wall Duct
  • WD 8550
  • WD 8550/2
  • FFD 150/35
  • Junctions
  • AFD 35
  • FFD Series
• Floor Outlet Boxes
  • 140 Series
    • FFOB 144
    • FFOB 145
    • FFOB 147
    • FFOB 148
  • FFBC 66
  • FFOB Series
    • FFOB 71
    • FFOB 72
    • FFOB 76
    • FFOB 77
  • FFOB 120
  • FFOB 121
  • FFOB 128
  • FFOB 129
  • FFOB 245
  • FFOB 248
  • FFOB 248/70
  • FFOB 250
  • FFOB 255 HD
  • FFOB 465 SS
  • FFOB 490 SS
  • FFOB 520
  • FFOB 522
  • FFOB 522
  • FFOB 538
  • FFOB 540
  • FFOB 550
  • FFOB 560
  • FFOB 568
  • FFOB 570
  • FFOB 590
  • FFOB 595
  • FFOB 599
• Above Floor Boxes
  • AFB 16
  • AFB 16/2
  • AFB 20
  • AFB 20/2
  • AFB 70
• Service Posts
  • SP 70
  • SP 5085
  • SP 7020
  • SP 7550
  • SP 8550
  • SP 9090
  • SP 10176
• Pedestal Outlets
  • BP 70
  • BP 70/2
  • BP 7020
  • BP 8550
• Misc Items
  • C6ADFP
  • UMB 75

• Based on the "Centre Mount" range the "Snap-Fit" system utilises an extruded aluminium cover which "Snap-Fits" into position to provide extra protection and streamline appearance. Ideally suited for use in schools, colleges and universities.
• Suitable for Category 6 data cabling when used with ECD angled data face plates.
• The ECD "Snap-Fit" system eliminates the need to screw fix covers and can be mounted horizontally or vertically.
• The "Snap-Fit" covers engage at the top edge of the duct, avoiding the problem of floor coverings obstructing the fitting or removal of the cover.
• Duct and covers are powder coat finished. Standard colours are Black, White, APO Grey, Stone Beige. Over 50 non standard colours are available.
• This product has been examined in accordance with AS 3000 and conforms to A.C.A requirements.

"Easy as ECD"

• The contractor shall allow to supply and install "Electric Cable Duct Systems P/L CML 150/40 "Centre Mount" skirting duct (150mm x 40mm) surface mounted or as otherwise nominated and as described below.
• The system will reflect the integrated voice/data cabling requirements of Category 5 & 6 and have ferrous mounting shrouds for both power and voice /data outlets. Outlets shall be standard size Clipsal, HPM or PDL Type.
• The body of the duct shall be extruded aluminium pre treated and powder coated to a standard colour (White, APO Grey, Stone Beige, or Black) or as nominated by the architect. The duct cover shall be extruded aluminium, powder coated to match.
• The system shall be earthed in accordance with AS3000 wiring rules and conform to A.C.A requirements.
• Bends shall be site mitred to fine tolerances with concealed reinforcing angles riveted in position or alternatively manufactured internal / external bends . Adjacent lengths of duct body shall be splice joined with slide in joiner plates. Slide in stop ends shall be fitted where necessary. The cabling contractor shall retain cables in the duct with custom made cable retainers supplied by the duct manufacturer.
• Installation shall be performed by experienced duct installers, generally as described on E.C.D "Recommended Installation Procedure" leaflet.

Parts List

Description

Colour

Duct Body ‑ 3m lengths

CML 150/40

Duct Cover ‑ 3m lengths

CML 150 C

GPO Mounting Kit only (no GPO)

CML 150/40 K

Voice/Data Mounting Kit only (no bakelite supplied)

CML 150/40 VDK

Internal Bend

CML 150/40 IB

External Bend

CML 150/40 EB

Reinforcing Angle (Site mitred bends)

CML 150 RA

Stop End

CML 150/40 SE

Flat Bend Plate

CML 150 FB