• Home / Search
• Skirting Duct
  • CM 100/35
  • CM 125/35
  • CM 150/35
  • CM 150/40
  • CM 150/50
  • CM 200/50
  • CM 200/50/3
  • CML 125/35
  • CML 150/35
  • CML 150/40
  • CML 150/50
  • CML 200/50/3
• Floor and Wall Duct
  • WD 8550
  • WD 8550/2
  • FFD 150/35
  • Junctions
  • AFD 35
  • FFD Series
• Floor Outlet Boxes
  • 140 Series
    • FFOB 144
    • FFOB 145
    • FFOB 147
    • FFOB 148
  • FFBC 66
  • FFOB Series
    • FFOB 71
    • FFOB 72
    • FFOB 76
    • FFOB 77
  • FFOB 120
  • FFOB 121
  • FFOB 128
  • FFOB 129
  • FFOB 245
  • FFOB 248
  • FFOB 248/70
  • FFOB 250
  • FFOB 255 HD
  • FFOB 465 SS
  • FFOB 490 SS
  • FFOB 520
  • FFOB 522
  • FFOB 522
  • FFOB 538
  • FFOB 540
  • FFOB 550
  • FFOB 560
  • FFOB 568
  • FFOB 570
  • FFOB 590
  • FFOB 595
  • FFOB 599
• Above Floor Boxes
  • AFB 16
  • AFB 16/2
  • AFB 20
  • AFB 20/2
  • AFB 70
• Service Posts
  • SP 70
  • SP 5085
  • SP 7020
  • SP 7550
  • SP 8550
  • SP 9090
  • SP 10176
• Pedestal Outlets
  • BP 70
  • BP 70/2
  • BP 7020
  • BP 8550
• Misc Items
  • C6ADFP
  • UMB 75

• A jumbo sized skirting duct designed specifically to accomodate bulk cabling requirements for both power and communications.
• Suitable for Category 6 data cabling.
• The largest skirting duct available, ideally suited for use in "call centres", "info tech facilities" and "research institutes".
• The ECD "Centre Mount" range of skirting ducts allows for all outlets to be terminated in the equipment fit‑off zone providing an attractive symmetrical arrangement in "centre mount" format.
• Ferrous mounting shrouds the full depth of the duct body allowing maximum space for outlet termination and screening.
• Duct and covers are powder coated finished. Standard colours are Black, White, APO Grey and Stone Beige. Over 50 non‑standard colours are available.
• This product has been examined in accordance with AS 3000 and conforms to A.C.A. requirements.
• Accomodates RCD or Surge Protected Outlets without the use of mounting blocks.

"Easy as ECD"

Suggested Specification:

• The contractor shall allow to supply and install "Electric Cable Duct Systems P/L" CM 200/50/3 "Centre Mount" skirting duct with "Snap-Fit" extruded aluminium cover (200x50mm) surface mounted or as otherwise nominated and described below.
  
• The system will reflect the integrated voice/data cabling requirements of Category 5 & 6 and have ferrous mounting shrouds for both power and voice /data outlets. Outlets shall be standard size Clipsal, HPM or PDL Type.
  
• The body of the duct shall be extruded aluminium pre-treated and powder coated to a standard colour (White, APO Grey, Stone Beige, or Black) or as nominated by the architect. The duct cover shall be extruded aluminium pre‑treated, powder coated to match.
  
• The system shall be earthed in accordance with AS3000 wiring rules and conform to A.C.A requirements.
  
• Bends shall be site mitred to fine tolerances with concealed reinforcing angles riveted in position or alternatively manufactured internal/external bends . Adjacent lengths of duct body shall be splice joined with slide in joiner plates. Slide in stop ends shall be fitted where necessary.
  
• Installation shall be performed by experienced duct installers, generally as described on E.C.D "Recommended Installation Procedure" leaflet.

Parts List

Description

Colour

Duct Body ‑ 3m lengths

CM 200/50

Duct Cover ‑ 3m lengths

CM 200 C

GPO Mounting Kit only (No GPO)

CM 200/50 K

Voice/Data Mounting Kit only (No bakelite supplied)

CM 200/50 VDK

Internal Bend

CM 200/50 IB

External Bend

CM 200/50 EB

Reinforcing Angle (Site mitred bends)

CM 200 RA

Stop End

CM 200/50 SE

Flat Bend Plate

CM 200 FB